Flex Tools Variable Speed polishers
L 1106 VE
L 3406 VRG
L1501VR
L 1503 VR
L 1506 VR

Flex tools Angle Grinders
L 3709
L 3410 VR
L 1509 FR

Flex Tools Car Polishers
XC3410VR
LK 603 VVB
LK 302 VE
 VRG 3403 VRG

Flex Tools Grinding and Polishing Drills
Flex ALi 10.8
Flex tools 10.8 S

metal grinding and polishing treatment guide
Water-soluble, ecological automotive paints should be processed with little force, but rather at low speed and gentle pressure. That prevents the heating up of the polishing medium and too much paint abrasion. FLEX sponges and appropriate quality polishing media ensure the proper treatment to suit the material (observe the recommended speeds / metallic enamels require special polishing media).

FLEX recommendations:

  • Single-coated lacquering (without clear coat varnish):
    2,200 to 2,800 rpm with blue FLEX polishing sponges
  • Double-coated lacquering (without clear coat varnish):
    1,200 to 1,700 rpm with white FLEX polishing sponges
  • Processing beads and curves as well as repolishing:
    with black FLEX Velcro sponges

For a perfect finish always work on one section of the vehicle at a time (hood, trunk, etc.).

Do not circulate, but rather polish the surfaces length and cross wise. Mechanically remove polishing medium residues with a slightly moistened lamb or wool fleece.

To conserve the enamel, wax should be applied with a soft VelcroTM sponge. This deepens the sheen of the enamel especially for black cars. After absorption and drying, polish down with lamb and wool fleece.

*Important: Use a separate sponge for each polishing medium and color!