Flex Tools Concrete and Masonry drills
Flex tools Natural Stone Grinders and Polishers
Flex Tools metal finishing
Flex Tools automotive grinding and car polishing
Flex Tools Hand Held Drills


FLEX LW 1503 Natural Stone Wet Polisher
FLEX LW 1202 S Natural Stone Wet Polisher
FLEX LW 603 VR Natural Stone Wet Polisher
FLEX PLW 903 S Natural Stone Wet Polisher
FLEX Natural Stone Wet Polisher Accesories


FLEX LW 1509 Natural Stone Wet Grinder
FLEX LW 1703 S Natural Stone Wet Grinder
FLEX Natural Stone Wet Grinder Accessories


FLEX LWW 1506 VR Natural Stone Wet Edge Milling
FLEX LWW 2106 VR Natural Stone Wet Edge Milling


FLEX BD 05 Core Drills
 FLEX BHW 1549 vr Core Drills
FLEX BED 55 Core Drills

Flex Natural Stone accessories

The slim, stable drill stand, lateral supports and long feed column are characteristic of this drilling unit, enabling drilling of the next higher step from a lower one. Swiveling the feed column enables drilling in corners and recesses on banisters, gravestones and baths. Drilling speed can be adapted to any bit diameter (1/2” to 3”) thanks to mechanical 3-speed gearing and VR full-wave electronic control.

*Diamond core bits for natural stone and concrete are to be purchased separately.

bed55

 

SPECIFICATIONS

 BED 55

 

FLEX GFCI operator protection
circuit breaker
For electrical safety during wet grinding. Cuts out extremely fast with the required response sensitivity (less than 15 milliseconds). It has reactuation protection at power interruption.


BED 55: Pick up water even on stairs
Fasten the water collector with suction cup up to approx. 2” in drilling position, position feed column with drill bit over the water collector, extract water.

 

Power input

Power output
Speed under load
00First gear
00Second gear
00Third gear
Drill bit connection
Diamond drill bit
Surface area occupied by stand
Weight (complete unit)

 

11 AMP

700 watts

350-1,000 RPM
800-2,300 RPM
1,600-4,600 RPM
G 1/2"
1/2" to 3"
16"x5"
31 lbs


STANDARD EQUIPMENT PART #

 

1 water collection

1 stationary drill stand (BD05)
1 open-ended wrence 32mm
1 GFCI operator protection circuit breaker in cable

 

256.370

254.436
251.475
259.990
ADVANTAGES AT A GLANCE
  • FLEX triple VR electronics: with consistent speed control by tachometer generator, overload protection, and speed selection
  • GFCI operator protector circuit breaker: integrated in cord
  • Quality shut-off carbon brushes: protects the motor against damage
  • Integrated water supply: through the gear head
  • Stationary drill stand: with precision column guide, drill stroke up to 12”
  • Water collector with suction cup: for collecting water, even on stairs
  • Drill bit connection: G 1/2”
  • Safety clutch