 |
|
|
The
17.6 AMP strong, three speed drill BSW 2123 C combined with
the BD 160 stationary drill stand - this is a lightweight,
mobile unit for one-person operation. The drill bits are
cooled directly by the central water supply. The seals can
be replaced
quickly from the outside. The combination shaft with two
connections, G 1/2” inside, 1-1/4” UNC outside,
makes the connection of standard drill bits possible. The water
collector ring prevents
water damage.
|
|
| |
SPECIFICATIONS
|
BED
163 |
|
Power input
Power output
Tool fixture
00Internal
00External
Sped under load
00First gear
00Second gear
00Third gear
Diamond drill bit
00First gear
00Second gear
00Third gear
Surface area occupied by stand
Weight
00Complete unit
00Machine alone
|
17.6 AMP
1,400 watts
G 1/2"
1-1/4" UNC
450 RPM
1,080 RPM
2,100 RPM
3" to 6"
1-3/8" to 3"
1/2" to 1-3/8"
17"x 8"
39.6lbs
18.7 lbs
|
|
  |
|
|
|
|
| STANDARD EQUIPMENT |
PART # |
|
1 open-ended wrench, 13 mm
1 open-ended wrench, 19 mm
1 open-ended wrench, 36 mm
1 dril stand (BD160)
|
101.516
104.914
253.649
256.955
|
|
|
|
| ADVANTAGES AT
A GLANCE |
|
- Mechanical 3-speed gearbox: with optimum speed graduation
- Safety
clutch: offers protection if the core drill is jammed
- Bubble
level: for accurate unit alignment
- Quick-release core bit
ring: 1 1/4” UNC
- Slanted drilling: up to 45º
- Central water feed
- Hand crank: attaches to both sides
- GFCI operator protecto circuit breaker: integrated in cord
- Quality shut-off carbon
brushes: protects the motor against damage
- Drill bit connections:
combination shaft with two connections, G 1/2” (internal),
1 1/4” UNC (external)
- Effective drill bit length: max.
17”
- Mounting for water collection ring: for drill diameter up
to 5-1/8”
|
|
